Hydac HMG 3010 User Manual download pdf (Page 15)

HMG 3010 Page 15

Edition 11/2011 - V04 R01 Part No.: 669855

The HMG now shows the measured values

in the 7-segment display panes. Depending

on the setting, the Min/Max values are

shown in addition to the current measured

values.

The Recording menu is used for recording

measurement curves. During recording, the

measured values are recorded for a certain

period of time, stored and then shown as a

graph.

Example of Recording a Measurement

Curve:

The function bar of the Actual Measured

Values menu contains the item Recording.

Select it using the 5-way navigation key, fol-

lowed by OK. In the Recording menu that

follows, select Start recording and confirm

with OK.

In the menu that follows, Start Recording,

you are shown the default settings for re-

cording a measurement curve. In our exam-

ple, we want to generate a Simple meas-

urement curve with two sensors at chan-

nels A and B with a sampling rate of 1 ms

and a Recording time of 30 s. Then meas-

urement is to be finished.

Simple measurement curve is already set

in the menu. For the other settings, proceed

as follows:

Using the arrow keys of the 5-way navigation

key, select the third item, Sampling rate. OK

opens up a drop-down list where you select

a sampling rate of 1 ms, confirm with OK.

This takes you automatically to the Re-

cording time line. Press OK. Scroll down

the list using the arrow keys to 30 seconds,

and confirm with OK.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 85 86

Comments to this Manuals

No comments