Hydac HMG 3010 User Manual download pdf (Page 46)

HMG 3010 Page 46

Edition 11/2011 - V04 R01 Part No.: 669855

Event: Leaving measurement window

This trigger event is very similar to Specific

value. You can specify a Lower Limit and

an Upper Limit. The trigger is activated

when the measured value enters the meas-

urement window. However, recording is not

started until the measured value leaves the

measurement window in a rising or falling

direction.

Note:

Sub-channel setting only required for SMART sen-

sors (see Section 6.4) and CAN function (see Sec-

tion 6.5).

Event: Timed

The event setting using a time function

(Timed) is useful for measurements which

are to be repeated at specific intervals. In the

Settings menu you can specify the number

of Repetitions (max. 30,000), the Interval

and the Starting time. In the Start item you

can specify whether this event is to be acti-

vated immediately (Start immediately) or

not until after a certain Start date and Start

time.

In the

– Event: Timed –

example shown on the right, a measurement

is started 10 times every 30 minutes. The

trigger becomes active for the first time on 21

October 2006 at 14:20.

Up to 4 events can be specified for recording

triggered measurements. After making each

of the settings, return to the Trigger Set-

tings menu via Back. The menu now pro-

vides an overview of all the events and set-

tings for you to check.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 85 86

Comments to this Manuals

No comments