Hydac CMU 1000 User Manual download pdf (Page 70)

Condition Monitoring Unit CMU 1000 Page 70

Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749

• You can transfer the currently opened CM program to the CMU 1000 with

"Transfer into device“.

Note!

Only error-free programs can be transferred into the CMU 1000.

 The following message appears after the program has been successfully

applied:

 Here you can select whether you also wish to transfer the source code of the

program into the CMU 1000.

Note!

If you transfer the source code into the CMU 1000 as well, then it is possible

for it to be read out again from every other connected PC and modified! If the

source code is not transferred as well into the CMU 1000, then the program

cannot be read out from another PC.

 The following message will appear if the CM program is not error-free:

 Eliminate the error(s) found in the CM program (see in this connection

Chap. 6.2.2., "Function List" Window and Chap. 8, "Error messages") and

transfer the program again.

Note!

If you transfer a program and a power failure occurs during the transfer, then

the program will not be saved in the CMU 1000 after power is restored. For

that reason, first save your program on the PC on which it was originally

generated or modified before making the transfer.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 121 122

No comments

Hydac CMU 1000 User Manual Page 70